Rv042 vpn client setup

In the Interface drop-down list, choose one of the available WAN interfaces. This is the interface that will establish the VPN tunnel with the other side. Step 4. Step 5. You only need to enter the IP address of the device. You need to enter the network IP address and its respective subnet mask. You need to enter the first IP address and the last IP address of the range of devices.

Step 6. Step 7. If you choose IP Only as the remote local security gateway type, choose one of these options from the drop-down list below:. Step 8. IKE uses a preshared key to authenticate a remote peer. Step If you need the VPN session to be fast and security is not an issue, then choose this option.

This is a more balanced option in terms of security and speed. If you need the VPN session to be secure, and speed is not an issue, then choose this option. In the Phase 1 Encryption and Phase 2 Encryption drop-down lists, choose one of the following for encryption and decryption of the key:. It is more secure than DES.

It offers more security than DES. If you choose this option, follow Step 7 and Step 8. Enter the key identifier to identify the local client in the Key ID String field. To choose the Server Certificate File, click the To choose the Client Certificate File, click the To choose the Client Private Key File, click the Enter the preshared key in the PreShared Key field.

This should be the same key that you use during the configuration of the tunnel. In the Cipher Algorithm drop-down list, choose the appropriate option that was chosen during the configuration of theVPN Connection. In the Cipher Key Length drop-down list, choose the option that matches the key length of the option that was chosen during your configuration of the VPN Connection.

In the Hash Algorithm drop-down list, choose the option that was chosen during your configuration of the VPN Connection.

In the Key Life Data limit field, enter the value in kilobytes to protect. The default value is 0 which turns off the feature. Note: In the Phase 2 section, you can configure the parameters such that an IPsec SA with the remote client gateway can be established.

In the Transform Algorithm drop-down list, choose the option that was chosen during the configuration of the VPN connection. In the Transform Key Length drop-down list, choose the option that matches the key length of the option that was chosen during the configuration of the VPN connection.

If enabled, negotiation is made for each policy directly after connected. If disabled, negotiation is made on a need basis. Optional To receive an automatically provided list of networks from the device, or to send all packets to the RV0XX by default, check the Obtain Topology Automatically or Tunnel All check box.

If unchecked, the configuration must be performed manually. If this is checked, skip to Step Click Add to add a Topology entry into the table. The Topology Entry window appears. Click OK. This section explains how to setup the VPN connection after all the settings are configured. Enter the username for the VPN client in the Username field. Enter the password for the user in the New Password field.

Enter the password again to confirm it in the Confirm New Password field. Check the Active check box to make the VPN user active. Click Add to list to add the user to the table. Click Save to save the settings. Export Certificate Step 1. A warning message window appears: Step 2. Import Certificate Step 1. Click Import to import the certificate. In the User Name field, enter the username that was assigned in the router. In the Password field, enter the password assigned in the router.

Click Connect to access the VPN. Optional To save the configuration, click Save. Optional To delete a saved configuration, click Delete. Click Add. Click the General tab. From the Auto Configuration drop-down list, choose the desired configuration. Client Configuration Step 1. Click the Client tab. In the IKE Fragmentation drop-down list, choose the appropriate option. Cisco Rv Replacement Step 9. Name Resolution Configuration Step 1. Click the Name Resolution tab.

Click the DNS tab. Click the WINS tab. Authentication Step 1. Click the Authentication tab. Local Identity Configuration Step 1. Step 1. Step 4. Enter the password again to confirm it in the Confirm New Password field. Step 5. Optional To allow the user to change their password, click the Yes radio button. Step 8.

Optional To edit any information about a user, click the specific user in the table. Edit the necessary information and then click Update. You can not edit the username. Step 9. Optional To delete a user from the table, click the specific user from the table and then click Delete. Step However, a certificate will increase the security of the VPN. Scroll down to the Certificate Management area.